It is currently Wed Aug 15, 2018 2:18 am



Post new topic Reply to topic  [ 8 posts ] 
 Parting out 97 C1500 short bed 
Author Message
Non Residents

Joined: Mon Mar 17, 2008 11:46 pm
Posts: 155
Location: KENTUCKY
Post Parting out 97 C1500 short bed
Hey guys, not been online much anymore. Hope everyone is well. Only have internet access at work lol. A buddy of mine and I have a 97 C1500 2wd shortbed truck we are parting. I can get pictures of anything you need

All prices can be negotiable, if you don't see something you need just ask! This was a complete driving truck until the transmission went out.

Good running 4.3 engine, $500, Cluster showed 175,000 miles but engine runs great
Burgundy short fleet side bed, some scratches but overall excellent condition. No tailgate. $400
3:42 5 lug drum brake rear end $300
Good radiator $40
ECM $50
Radiator support $50
Good airbags, steering wheel and passenger, $35 each
Good gray interior parts, seat does have some damage to driver side of the cushion.
usable burgundy hood, make offer, couple decent sized dents on top

PARTS THAT ARE SOLD: wheels, transmission, driveshaft, fenders, doors, floor mat, gauge cluster, gauge/radio/HVAC surround (bezel?)


Last edited by Blue_71 on Tue Jun 16, 2015 2:55 pm, edited 1 time in total.

Fri Jun 05, 2015 5:17 pm
Profile
Administrators
User avatar

Joined: Thu Oct 25, 2007 4:38 pm
Posts: 13081
Location: Beech Bluff, TN
Part of TN: West
Post Re: Parting out 97 C1500 short bed
:welcome: Back :hi:


Tapatalk via iPhone5

_________________
The Toy: "Square Vette" 72 C5 Blazer
Toy Puller: "Burakkubyūtī" 12 Tundra
Toy Hauler: "Feathers" Aluma 8218T
Owner/Admin "TN Classic Truck Club"


Sun Jun 07, 2015 3:23 pm
Profile WWW

Joined: Fri Dec 26, 2014 7:39 pm
Posts: 195
Location: Spring Hill, TN
Part of TN: Middle
Post Re: Parting out 97 C1500 short bed
Just curious, how are the front brake rotors? Even if they're good, my problem might be getting them to me without costing an arm & leg. :lol:

_________________
Phillip
-'66 Chevy C-10, BBW, SWB/Fleet (under construction)
(pics) https://www.flickr.com/photos/98543199@ ... 361013596/


Tue Jun 09, 2015 6:07 pm
Profile
Non Residents

Joined: Mon Mar 17, 2008 11:46 pm
Posts: 155
Location: KENTUCKY
Post Re: Parting out 97 C1500 short bed
I would say they are probably good but I will run by and double check. Your not really too far from me, I used to come to spring hill for training at the old saturn/GM center

Thanks Craig, maybe one of these days I will get internet at home or give in and get a smart phone lol


Wed Jun 10, 2015 9:53 am
Profile

Joined: Fri Dec 26, 2014 7:39 pm
Posts: 195
Location: Spring Hill, TN
Part of TN: Middle
Post Re: Parting out 97 C1500 short bed
Blue_71 wrote:
I would say they are probably good but I will run by and double check. Your not really too far from me, I used to come to spring hill for training at the old saturn/GM center

Thanks Craig, maybe one of these days I will get internet at home or give in and get a smart phone lol


Cool, I appreciate it. There's another truck at the salvage yard near my dad's place in Northeast MS, but I'm not sure of the condition of those either. I just want something decent that'll get me by for a little while until I redo the whole brake system. The PO of my Tahoe had the rotors/hubs machined down to fit the center caps of the wheels he had on it. As a result, I can't fit any wheel bearing dust caps. So, I gotta find another pair of rotors to make it work.

_________________
Phillip
-'66 Chevy C-10, BBW, SWB/Fleet (under construction)
(pics) https://www.flickr.com/photos/98543199@ ... 361013596/


Sat Jun 13, 2015 11:18 am
Profile
Non Residents

Joined: Mon Mar 17, 2008 11:46 pm
Posts: 155
Location: KENTUCKY
Post Re: Parting out 97 C1500 short bed
Ah gotcha. i checked Sunday while I was there pulling other parts, they have some surface rust on them but I don't feel any grooves or lips on them.

Added to the sold list 6-16-15, gauge cluster and gauge/radio/HVAC surround (bezel?)


Tue Jun 16, 2015 2:53 pm
Profile

Joined: Fri Dec 26, 2014 7:39 pm
Posts: 195
Location: Spring Hill, TN
Part of TN: Middle
Post Re: Parting out 97 C1500 short bed
Blue_71 wrote:
Ah gotcha. i checked Sunday while I was there pulling other parts, they have some surface rust on them but I don't feel any grooves or lips on them.


If you think they still have some life left, how much would you want for them?

_________________
Phillip
-'66 Chevy C-10, BBW, SWB/Fleet (under construction)
(pics) https://www.flickr.com/photos/98543199@ ... 361013596/


Tue Jun 16, 2015 8:04 pm
Profile
Non Residents

Joined: Mon Mar 17, 2008 11:46 pm
Posts: 155
Location: KENTUCKY
Post Re: Parting out 97 C1500 short bed
How does $20 for the pair or $40 if I refinish them sound? I think they will fit on our brake lathe


Wed Jun 17, 2015 8:35 am
Profile
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 


Who is online

Users browsing this forum: No registered users and 1 guest


Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

cron
Powered by phpBB © phpBB Group.